Failure message 68
AutoCAD R14 is not installed.

Info
If you want to know the weight, the english or french designation of a part or the page-no. in the printed catalog go to the function "catalog". Click on Dia or the button "Info" with left mouse key.

You want to import a linear-guide in your drawing?
1. Go to the button "Erweitert" , select function "Als Block einfügen" and "Als Festkörper einfügen".
2. Change from "Paper" to "Model".
3. Select the window with 3D-view.
4. Mark the linear-guide with STRG + C.
5. "File new" or open your drawing.
6. Import the linear-guide with STRG + V.

Other languages?
1. First install the 2 languages you do not use in your daily work, probably german and french.
2. Then install the english version. With the command "mt-f" or "mt-d" you may select another language.

Import of panel elements
1. Select the program part "Catalog".
2. Mark the end-points at the groove-lines in a profile-frame.
3. Determine the material-oversize.
4. Panel-element will be automatically inserted and considered in the parts-list.

Insert an additional post in the programm-part "Machine guard-overview"
With the command "insert post" a post will be inserted automatically in center between 2 existing posts. First select the command ?insert post, than click on lower profile where you want to insert the post. You can move the post to any position in the guard using the AutoCAD-command "STRECKEN". But you have to select the guards left and right of the moved post again in order to show the software the new positon.
If you know the positions of all post before you start your design-work, draw your poly-line from post to post. The program "Machine guard overview" inserts automatically posts at every end of your polyline.

Remove a post
You are in program "Machine guard overview". Click on button "post". Select the post you want to remove by clicking on lower part (close to the floor).